Backplates

Backplates for Traffic Signals

Oriux offers a variety of one-piece and multi-piece backplates for vehicle signals in aluminum and ABS.

Request information

 

Individual backplates can be ordered either flat or louvered (to allow air to flow through the plate). Backplates will fit on either aluminum or polycarbonate bodied signals and can be ordered as one-piece or multi-piece in aluminum or ABS material with or without reflective tape.

 

Features

Features

Backplates

  • Oriux backplates are fabricated from 0.06" (1.5mm) sheet aluminum which is electro-statically powder-coated in your choice of color. You can specify the color of powder-coating of each backplate by inserting the appropriate color suffix to the end of the part number when ordering.
  • Available colors include:
    • Flat back (Standard) - Specify ‘FBK’
    • Federal Yellow - Specify ‘FYL’
    • Olive Green - Specify ‘OGR’
    • Custom Color (Paint chip required) - Specify ‘CST
  • Borders are 5 inches wide (127mm) on the backplates for 12 signals, and 8 inches wide (203mm) on the backplates for the 8” signals.
  • Heavier gauge aluminum is available upon request. Stainless steel attaching screws and washers are included with each backplate.
  • Two inch (51mm) or three inch (76mm) wide reflective tape is also available as an optional item around the edges of flat backplates.
  • In addition, backplate assemblies are also available to custom-fit all Oriux 2-2-1 and 3-2 signal clusters in 12 inch signal sizes. Options are also available for any of the mounting methods being used for both inline and clustered signals, including standard, Plumbizer, mast arm clusters, and span wire clusters. Plumbizer, mast arm and span wire backplate assemblies include extra filler strips to cover gaps in the signal assembly caused by the mounting hardware. These filler strips require additional mounting screws and associated hardware, available as a cluster hardware kit.

Backplates Multi Pieces

  • Some backplates will fit these signal brands such as Oriux, McCain, LFE, Old Eagle Round, Econolite, and Durasig signals depending on their dimensions.
  • Oriux backplates are fabricated from ABS 1/4" in black color. Other thicknesses are available.
  • Borders are 5 inches wide (127mm) on the backplates for 12" signals, and 8 inches wide (203mm) on the backplates for the 8” signals.
  • Stainless steel attaching screws and washers are included with each backplate.
  • 2" (51mm) or 3" (76mm) wide reflective tape is also available as an optional item around the edges of the flat backplates.
  • In addition, backplate assemblies are also available to custom-fit 2-2-1 signal clusters in 12" signal sizes. Options are also available for any of the mounting methods being used for both in-line and clustered signals, including mast arm clusters, and span wire clusters. Mast arm and span wire backplate assemblies include extra filler strips to cover gaps in the signal assembly caused by the mounting hardware. These filler strips require additional mounting screws and associated hardware, available as a cluster hardware kit.
Ordering Information

Backplate Ordering Information

backplate
Warranty

One Year Limited Warranty

Oriux warrants these products against manufacturing defects in materials and workmanship for one year from the date of shipment from the factory. Specific contracts and regional laws may vary or alter these terms.

You may also be interested in

We can help you

Expert advice

For more information about our products and services, please contact us.

Contact Us